Asphalt primers for the protection and adequacy of substrates, masonry surfaces and foundations prior to the application of the waterproofing membranes. Improve bituminous membranes bonding.
Viscous asphalt emulsion containing an emulsifying anionic component. Recommended use: Protection and adequacy of substrates to be waterproofed. Advantages: Water soluble; Can be mixed with sand, gravel, mineral fibers, etc.; Solvent-free.
Application: The surface should be smooth and free from dust, oil or any other loose material which would hinder adhesion. Apply just 1 light coat. Mix 10-20% with water. Drying time: 24 h. Can be applied by brush, roller, spray gun…
Viscous asphalt emulsion additivated with resins, elastomeric polymers and anionic mineral emulsifying agents that ensure product stability. Recommended use: Product for the treatment of walls and party walls. Advantages: Once cured the product converts into a thick layer highly flexible at low; Easy application; Solvent-free.
Application: Product for the treatment of walls and party walls. Apply one or two homogenous layers with a brush, roller, spray gun, etc. Drying time: 24 h.
Bituminous primer with solvents for surface preparation. Suitable for all types of surfaces, whether porous or not. Especially rated for metal or polished surfaces. Do not apply in poorly ventilated areas. Advantages: Fast drying; Long-lasting and fully stable.
Application: Bituminous priming coat for foundations and partition walls. Apply a thin coat with a brush, roller, spray gun, etc. Rated to be used with self-adhesive membranes. Drying time: approx. 1 hour. Do not apply in poorly ventilated areas.
Anionic asphalt emulsion with low viscosity. Fast drying subjected to weather conditions. Recommended use: Asphalt-based primer for use prior to the application of the fully adhered waterproofing system, enhance bonding of bituminous membranes. Drying time: approx. 15-30 minutes. Apply in a ventilated area and dry air place. Advantages: Solvent free. Fast drying; Non-toxic product. Not flammable.
Application: Product for the treatment of walls and party walls. Apply one or two homogenous layers with a brush, roller or spray gun, etc. Rated for wood surfaces prior to the application of the self-adhesive membranes, POLITABER AUTOADHESIVA.